Offices are a natural fit for a Corsi-Rosenthal box: lots of shared air, plenty of floor and shelf space to stand one on, and a real payoff in fewer respiratory bugs doing the rounds. A room full of people breathing the same air for eight hours is exactly the setting where extra filtration earns its keep. Here is how to size and run one for a UK workplace — and where a tidier, quieter tested unit makes more sense.
The redesigned Corsi-Rosenthal box — lowest energy use of all 247 purifiers on the US EPA’s ENERGY STAR list, tested by Intertek. 622 m³/h CADR, under 35 dB, no proprietary lock-in. In stock, UK & EU shipping.
Check price →Use code CORSI10 for 10% off at checkout.Why an office needs one
Put several people in a room for eight hours and the air fills with whatever they exhale — including the fine droplets that carry colds, flu and COVID. A Corsi-Rosenthal box tackles that directly, adding 4–5 air changes per hour of particle-filtered air for only a handful of watts. It is the same principle behind clean air in schools, and the evidence that it helps is reviewed in our look at whether CR boxes are effective against COVID.
One honest limitation is worth flagging up front: a CR box filters particles, not gases. It will not lower the room’s CO&sub2; — that is a marker of stale air, and only fresh-air ventilation (an open window, or the building’s system) brings it down. Treat the box as a partner to ventilation rather than a replacement: it removes airborne particles and pathogens, while opening up clears CO&sub2; and brings in fresh air.
Sizing for a meeting room or open plan
A single high-output CR box comfortably handles a typical 6–8 person meeting room of around 40 m², delivering the 4–5 air changes an hour you want for a space that fills and empties through the day. The figure that matters is the box’s clean-air delivery rate (CADR) set against the room’s volume; our CADR calculator turns your room size into a target so you can check a box is up to the job.
Open-plan floors are a different problem. Air does not travel far across a busy floor full of desks, partitions and furniture, so a single big unit in a corner leaves the far side untouched. Plan on one box per zone instead — roughly one for each cluster of desks — and space them so each covers the people nearest it.
The noise problem in a quiet office
This is where DIY boxes struggle in practice. A box fan on full is audible, and on a video call that is a dealbreaker — so people quietly switch the box off, and a purifier that is switched off cleans nothing. The fix is either a quieter fan or a purpose-built unit. Fan choice makes a real difference to a DIY build; our guide to the best fans for a CR box covers the quieter, higher-static-pressure options. If the room must stay near-silent, a purpose-built unit with high-static-pressure fans delivers comparable clean air at under 35 dB — quiet enough to leave running through a call.
Cost for a workplace
A DIY box runs about £60 in parts and takes half an hour to build. A tested unit costs more up front but arrives assembled, looks the part in a client-facing space, and — like a DIY box — runs for only a pound or two a year on UK electricity. For one or two rooms either route works well. For a whole floor, factor in the build time and the ongoing filter changes across many units, and weigh that against the tidier appearance and lower noise of tested kit. Whichever you choose, the goal is the same: keep clean-air delivery high in every occupied zone, all day, without anyone reaching for the off switch.